Sony RM-AX4000 - Integrated Remote Commander Software Manual page 75

Editing a Start macro/Exit macro for an XPRESS key (Advanced mode)
You can edit an Action list (Start macro/Exit
1. Click the "Advance d" tab in the low e r le ft of the s cre e n to s w itch to Advanced m ode .
2. Click the XPRESS k e y you w ant to e dit a Start m acro/Exit m acro in the XPRESS list on the le ft s ide of the s cre e n.
Click "Edit Actions " on the right s ide .
3.
The "Edit Actions" dialog box appears.
This dialog box allow s you to confirm/edit a Start macro and Exit macro.
o Start M acro
o Displays a Start macro (Action list) programmed for an XPRESS key. If you click "Edit Start Macro," you can change the setting of the macro (Action
list).
o [Edit Start M acro]
o By clicking this, the "Edit Start Macro" dialog box appears. This dialog box allow s you to add/change/delete the action of a Start macro or change the
action order.
o Exit M acro
o Displays an Exit macro (Action list) programmed for an XPRESS key. If you click "Edit Exit Macro," you can change the setting of the macro (Action
list).
o [Edit Exit M acro]
o By clicking this, the "Edit Exit Macro" dialog box appears. This dialog box allow s you to add/change/delete an action of an Exit macro or change the
action order.
4. Click "OK."
The ""Edit Actions" dialog box closes, and the Start macro/Exit macro of the XPRESS key selected in step 2 is changed.
macro) programmed for an XPRESS key.
Page 75