Sony RM-AX4000 - Integrated Remote Commander Software Manual page 22

Changing the component settings (Standard mode)
The Component edit pane in Standard mode displays the follow ing items.
A Com pone nt lis t
Displays the programmed components on a list. Items on the top line of the list are Component keys of page 1 on the Remote Commander's display. You can
program up to four Component keys on each line (page), up to 16 Component keys on four lines (pages).
By clicking a Component key on a list, you can edit the component. You can also change the assignment of components on a list by dragging and dropping
the components you w ant to move.
B Com pone nt inform ation
Type :
Displays the selected component type (category).
Brand:
Displays the manufacturer of the selected component.
Labe l:
Displays a label of the selected component (Component key) on the button. By clicking the button, you can change the label of the Component key.
Note
If the component sets the preset code by "SOLUTION preset" (by reading the preset code from the remote control signal of your AV component),
manufacturer is not displayed in the "Brand" field.
C Change Pre s e t button
Changes the preset code of the selected component.
D Add button
Adds a component on an empty key position (w here no component is assigned) in the component list.
Page 22