Sony RM-AX4000 - Integrated Remote Commander Software Manual page 49

H STANDARD tab
Sw itches the edit mode to Standard mode, allow ing more basic programming for components and XPRESS settings, etc.
I Conne ction status
Displays the connection status betw een your PC and the Remote Commander.
 Whe n appe ars
 One Remote Commander is connected to the PC. You can send data.
 Whe n appe ars
 Tw o or more Remote Commanders are connected to the PC. You cannot send data.
 Whe n appe ars
The Remote Commander is not connected to the PC. You cannot send data.

J Dow nload to Rem ote button
Dow nloads the settings you made on AX Remote Editor to the Remote Commander.
K Em ulate button
Starts the Emulator. By pressing the keys/buttons on the Emulator, the signal from the Remote Commander connected to your PC is sent to an AV
component to confirm that the settings made on AX Remote Editor w ill w ork properly.
L Exit button
Exits AX Remote Editor.
Page 49