Sony RM-AX4000 - Integrated Remote Commander Software Manual page 50

Changing the component settings (Advanced mode)
The component edit area in Advanced mode displays the follow ing items.
A Com pone nt lis t
Displays the programmed components on a list. Items on the top line of the list are Component keys of page 1 on the Remote Commander's display. You can
program up to four Component keys on each line (page), up to 16 Component keys on four lines (pages).
By clicking a Component key on a list, you can edit the component. You can also change the assignment of components on a list by dragging and dropping
the components you w ant to move.
B Com pone nt inform ation
Type :
Displays the selected component type (category).
Brand:
Displays the manufacturer of the selected component.
Labe l:
Displays a label of the selected component (Component key) on the button. By clicking the button, you can change the label of the Component key.
Note
If the component sets the preset code by "SOLUTION preset" (by reading the preset code from the remote control signal of your AV component),
manufacturer is not displayed in the "Brand" field.
C Add button
Adds a component on an empty key position (w here no component is assigned) in the component list.
Note
You cannot add a component to the key position w here a component is already assigned or if 16 components are already programmed.
D De le te button
Page 50