Starting And Closing Omnipage Pro - NUANCE OMNIPAGE PRO 9 User Manual

Starting and Closing OmniPage Pro

Installation and Setup
To install OmniPage Pro:
1 Insert OmniPage Pro's CD-ROM in the CD-ROM drive.
The Setup program should start automatically. If it does not
start, locate your CD-ROM drive in Windows Explorer and
double-click the Setup.exe program at the top-level of the
CD-ROM.
2 Follow the instructions on each screen to install the software.
During installation, you may be prompted to enter a serial
number. You can find your serial number on the label of the
CD-ROM envelope.
The Caere Scan Manager is installed during OmniPage Pro installation.
You will be prompted to select your scanner manufacturer and model in
the Scan Manager so that you can use your scanner with OmniPage Pro.
Read the Scanner Setup Notes for the most detailed information about
scanner support and setup. You can open the Notes after OmniPage Pro
has been installed by clicking Start in the Windows taskbar and


choosing Programs Caere Applications
Setup Notes.
If you plan to scan, make sure your scanner is attached to your computer
and turned on before you start OmniPage Pro.
To start OmniPage Pro, do one of the following:
• Click Start in the Windows taskbar and choose Programs


Applications OmniPage Pro 9.0.
(Use the program group you selected during installation if it is
different than Caere Applications.)
• Double-click the OmniPage Pro icon located in the folder where
you installed OmniPage Pro.
Starting and Closing OmniPage Pro



Caere Documents Scanner


Caere
3