Installation
Installing Kai's Power SHOW
This chapter covers the installation of
your Kai's Power SHOW software.
Instructions are provided for both
Windows and Macintosh. Follow the
instructions appropriate to your system.
Windows Installation
System Requirements
•
Pentium Processor
•
Windows 95/NT 4
•
16 MB Free RAM
•
16- or 24-Bit Video
•
45 MB Free Hard Drive Space
•
CD-ROM Drive
•
Audio Card (Optional)
8
Kai's Power SHOW
Installation
To install Kai's Power SHOW:
1. If necessary, launch Windows (95 or
NT 4).
SHOW will not install in Windows
NT 3.5.1 or Windows 3.X.
2. Insert the SHOW CD-ROM into your
CD-ROM drive.
The installer and all related files reside
in the root directory of the SHOW
CD-ROM.
3. If you're using Windows NT 4 or
Windows 95, choose Start menu>
Run.
4. Type the letter corresponding to your
CD-ROM drive, followed by:\setup
(for example, type d:\setup if using
the D drive) and click the OK button.
5. Follow the displayed prompts.
Macintosh Installation
System Requirements
•
Power Macintosh
•
MacOS 7.5.5 or Later
•
16 MB Free RAM
•
16- or 24-Bit Video
•
50 MB Free Hard Drive Space
•
CD-ROM Drive
Installation
To install Kai's Power SHOW:
1. Insert the SHOW CD-ROM into your
CD-ROM drive.
2. Double-click the SHOW CD-ROM
icon on the desktop.
3. Double-click the SHOW Installer icon
to begin installation.