ScanSoft Kai’s Power SHOW User Manual page 56

You can also reposition the text on the
slide by dragging it to a new position.
To edit a text string:
1. In the Text fx dialog, click the text
string you want to edit. A highlight
appears around the string. The string
also appears in the Text Entry box at
the bottom of the dialog.
2. Select the text you want to change and
type over it in the Text Entry box.
3. Click the next text string and repeat
steps 1 and 2.
To change the font color:
1. Click the text string you want to
change. A highlight appears around
the text.
2. Click-hold the Font Color label, and
choose a color from the picker that
appears.
Use the Color text label to change the color of
your text.
56 Kai's Power SHOW
To change the font type:
1. Click a text string to select it. A
highlight appears around the text.
2. Click the Font label, then choose a
font from the pop-up menu.
The pop-up menu displays all of your
system fonts.
To change the font size:
1. Click a text string to select it.
2. Click the Font Size label, then choose
a size from the pop-up menu.
To change font style:
1. Click a text string to select it.
2. Click the Font Style label, then choose
either Bold, Italic, or Underline from
the pop-up menu.
Active styles are designated with a
check mark in the pop-up menu.
To change letter spacing:
1. Click a text string to select it.
2. Click the Spacing label, and choose a
percentage from the pop-up menu.
Higher percentages expand the
spacing between letters. Lower
percentages compress the spacing.
To change line spacing:
1. Click a text string to select it.
2. Click the Line Spacing label, then
choose a percentage from the pop-up
menu.
Higher percentages increase the
spacing between lines of text. Lower
percentages compress line spacing.
To adjust shadow opacity:
1. Click a text string to select it.
2. Click the Shadow label, then choose a
percentage from the pop-up menu.
Higher percentages make the shadow
darker. Lower percentages make
shadows lighter.
To set text alignment:
1. Click a multi-line text string to select
it.
2. Click the Align label, then choose an
alignment from the pop-up menu.