Electrical Connections - Frigidaire FHWC3055LS Use And Care Manual

Electrical connections

DANGER
Danger of electric shock! All fittings must be
installed by a competent person in accordance
with current wiring regulations and local
building regulations. If in doubt, consult a
qualified electrician.
IMPORTANT
Always switch off the electricity supply at
the mains during installation, cleaning and
maintenance. We recommend that the fuse is
withdrawn or circuit breaker switched off at the
distribution board while work is in progress.
Step 4:
• Loosen the 2 short screws from the junction box
(fig. ) .
fig. fig.
• Connect the incoming positive, neutral and
ground cables to the respective terminals. The
ground cable is already pre-assembled onto the
junction box to provide grounding (fig.
fig. fig.
L (live) = Black
).
N (neutral) = White
(ground) = Green
L
N
Installing the hood
• Mount the junction box onto the range hood
using 2 short screws (13) (fig.
fig.
Step 5:
• Insert the upper chimney (2) into the lower chimney
(3) from top to bottom (fig.
• Mount lower chimney (2) on the range hood (1).
• Fit the tab, which is bend by 90 degrees, into the
lower bracket notch and mount to the lower bracket
(4) (fig. / ).
• Fix it with 2 screws (12) (fig.
fig. fig.
fig. fig.
• Pull the upper chimney (2) to the upward position
to match the screw hole of the upper bracket.
Mount to the upper bracket (3) with 2 side screws
(10) (fig. ).
).
).
).
fig. fig.
9
GB