Save A Image Adjustment Value; Load A Image Mode - Sanyo PDG-DET100L - SXGA+ DLP Projector Owner's Manual

Save a image adjustment value

1
Decide your desired image adjustment
value through the image adjustment
pages "1" to "3".
2
Display the page "3" and select the
desired image number*
down menu of the Save Adjustment.
3
Register by pressing the Set button.
To restore the adjustments, press the
Reset button.
The Image1 to Image10 are for the user preset modes to store the image adjust-
ment.
The Original Mode is represented the mode that user preset mode Image1 to
Image10 is created from the predefined image modes Standard, Real or Cinema.

Load a image mode

Display the page "1" and select a set to
load with the pull-down menu button of
the Image Adjustment Mode and press
the Set button.
* Available image mode may differ from the actual depending on the projector's model type.
1
Type1: Image1 to Image4
Type2: Image1 to Image10
with the pull-
1
Control the Projector
43
Network Board
OWNER'S MANUAL