Sanyo PDG-DET100L - SXGA+ DLP Projector Owner's Manual page 46

Chapter 4 Controlling the Projector
(Set JavaScript On)
* In case of 2 lamps model
There are various kind of ways to change the JavaScript preference depending on the web
browser's version and application. Please refer to chapter "Appendix: Web browser
setting/Active Script (JavaScript enable)" (
46
(Set JavaScript Off)
p.72).
Item Description
Lamp Interval ....Sets the interval period of
switching two lamps.
......Sets the remote control codes.
Remote Control
Lamp Counter
Reset ................Resets the lamp use-time.
Reset when replaced lamp.
P-TIMER ............Used to display the timer on
the screen. The status is
changed as ON -> STOP ->
OFF when this button is
pressed repeatedly.
Factory Default ..Restore the value of the setting
items to the factory default
value.
* There may not be available depending on the
projector's model type.
About Lamp Counter reset
The confirmation window as the left will
appear when the Reset button of the "Lamp
Counter Reset" is pressed. Select which
lamp counter is to be reset with the radio
button and then press the OK button.
here may fail to be
* T
reset depending on
the projector's type.
Item Description
Actual Time........Displays the current time set to
the projector.
Timer Setting ....Function to switch on or off the
projector at the programmed
date and time. Please see
chapter "How to set the
Timer" for further instructions.
* Please see the pages 48 - 49 for details.