Web Browser Setting; Active Script/Javascript Enable; Proxy Setting - Sanyo PDG-DET100L - SXGA+ DLP Projector Owner's Manual

Chapter 7 Appendix

Web browser setting

This product is designed enable the projector to be set up and controlled from an
Internet web browser. Depending on the preference settings of the web browser,
some control functions may not be available. Please make sure that the following
functions are set up properly in the web browser.

Active Script/JavaScript enable

There are some control items used with the JavaScript
function in the setting pages. If the web browser is set
not to use this JavaScript function, it may not control the
projector properly. In this case, the following warning
message will be displayed on the top of the page. To
enable the JavaScript, please see further instructions on
the next page.

Proxy setting

In some cases, your web browser is set up to use the proxy server for the internet or
intranet connection. In this case, when you install this product into the local network,
you should set up the proxy setting of web browser preference correctly. Especially
when connecting the projector and computer with a UTP cross cable directly, or
when the network does not provide the proxy server, make sure that "not use proxy
server" is set up in your web browser preference. To set up the proxy setting, please
see further instructions of item "Proxy setting" (
There are various ways to change your browser preferences depending on the version,
Windows, Macintosh or applications. Please see the setting instructions on next page for
example and also refer to on-line help of your web browser.
72
p.74).