Service - Sanyo PDG-DET100L - SXGA+ DLP Projector Owner's Manual

Chapter 4 Controlling the Projector

Service

This function sets parameters for service items of the projector. As these
service items are used mainly for maintenance, please use the default set-
ting unless a change is needed. There may be not available items depend-
ing on the projector's function.
- The indication of video system in this page is displayed as follows.
Video System
480I
480P
575I
575P
720P60
720P50
1035I
1080I60
1080I50
1080P60
1080P50
The adjustments of H/V Area and Position are effective only for video input mode. These
adjustment values are stored with each video system mode as the above.
50
Input Signal
NTSC [VIDEO], [S-VIDEO], [Y, Cb/Pb, Cr/Pr]
NTSC [Y, Cb/Pb, Cr/Pr]
PAL [VIDEO], [S-VIDEO], [Y, Cb/Pb, Cr/Pr]
PAL [Y, Cb/Pb, Cr/Pr]
[Y, Pb, Pr]
[Y, Pb, Pr]
[Y, Pb, Pr]
[Y, Pb, Pr]
[Y, Pb, Pr]
[Y, Pb, Pr]
[Y, Pb, Pr]
Item Description
Fan Control
Speed ................Sets fan control speed.
Prohibition..........Sets the prohibition of the pro-
jector control by the remote
control or the keys on the pro-
jector.
Item Description
Video System* ..Displays the current video sys-
1
tem mode.
............Adjusts the horizontal effective
H Area* 1
area.
V Area* 1 ............Adjusts the vertical effective area.
H Position* ........Moves image horizontally
1
V Position* 1 ........Moves image vertically.
* It cannot be displayed in the computer mode.
1
* To restore the setting, press the Default button.
* Some projector's model types cannot support
this function.