Cannot Connect In Advanced Connection Mode; Or Wired Lan Connection; The Slide Show Cannot Be Displayed On The Desired Display When The Multi-Screen Display Function Is Being Executed; Applications Are No Longer Displayed From The Computer Screen When The Multi-Screen Display Function Is Executed - Epson BrightLink 455Wi Operation Manual

Troubleshooting
Cannot connect in Advanced Connection Mode or Wired LAN connection
Check
Is the SSID setting different.
Is the same WEP key set?
Are the connection denial functions, such as MAC Address
restrictions and port restrictions, set correctly at the
access point?
Are the IP address, the Subnet Mask, and the Gateway
Address for the access point and the projector set
correctly?
Are the access point and the projector's subnet different? Select Manual search from EasyMP Network Projection, specify the IP address, and connect.

The Slide Show cannot be displayed on the desired display when the multi-screen display function is being executed.

Check
Are you using PowerPoint 2002 or an earlier version?
For Windows

Applications are no longer displayed from the computer screen when the multi-screen display function is executed.

Check
Is another application running on the virtual display?
For Windows
Set the computer, the access point, and the projector to the same SSID. See your projector User's
Guide for details.
When selecting WEP from Security, set the access point, the computer, and the projector to the same
WEP key. See your projector User's Guide for details.
Set the projector to allow connections from the access point.
When not using a DHCP, adjust each setting. See your projector User's Guide for details.
p.30
s
To set and use two or more virtual displays, use PowerPoint 2003 or later, or limit the number of
virtual displays to one before displaying the Slide Show.
When Virtual Display is installed, another application sometimes runs on the virtual display. In this
case, set Virtual Display to "Off" in "Screen properties".
Remedy
Remedy
Remedy
45