Two Connection Modes; Quick Connection Mode; Advanced Connection Mode - Epson EasyMP Network Projection Operation Manual

Two Connection Modes

There are two methods of connecting a computer and the projector via a
network by using EasyMP Network Projection.
a
• Depending on the projector model, either wired LAN connection or
wireless LAN connection may not be available.
• To use the wireless LAN connection, you need the Wireless LAN
unit for the projector.
If the Wireless LAN unit is not supplied with your projector, please
purchase the optional accessory. See the following manual for details
on optional accessories.
User's Guide
s

Quick Connection Mode

Quick Connection Mode is only available when you install the Wireless
LAN unit in the projector.
In Quick Connection Mode, you can connect the projector and the
computer directly using wireless communication. This allows you to project
the computer screen without making any complicated network settings.

Advanced Connection Mode

Advanced Connection Mode connects to an existing network system.
In Advanced Connection Mode, you can connect the projector and the
computer via a LAN access point.
When connecting to a network via Wired LAN, connect the projector to
the network hub with a commercially available LAN cable.
9