Using Set options
Using Set options
You can make setting options such as the processing method when
EasyMP Network Projection starts.
Access Set options from the EasyMP Network Projection main screen.
Procedure
A
Click "Set options" on the EasyMP Network Projection main
screen.
The Set options screen is displayed.
B
Set each of the items.
Confirm the details of the set items in the next step. When you have
made all the necessary settings, click OK to close the Set options
screen.
Setting Each Item
Set each item from the General settings tab and the Adjust performance
tab.
General settings tab
Use full-screen
This setting is disabled because the projector does
not support the movie sending function.
video transfer
Encrypt
Select to encrypt and transmit data. Even if data is
intercepted, it cannot be decrypted.
communications
When using Quick Connection Mode, make sure
you always select this checkbox.
Select to encrypt and transmit data. Even if data is
intercepted, it cannot be decrypted.
36