Function
SCREEN Menu Options
To Change PJT Mode
* This function turns the projected image upside down or flips horizontal.
1. Press the MENU button. Then, move to SCREEN with the
∧, ∨, <, > buttons and press the ◉OK button.
2. Press the ∧, ∨ buttons to move to PJT Mode and press
the ◉OK button.
3. Move to a desired item with the ∧, ∨ buttons and then
press the ◉OK button.
•
Select Rear when projecting from the back of the transparent screen purchased separately.
•
Select Ceiling when installing the product on the ceiling.
•
When PJT Mode is Rear/Ceiling, the left/right of the speaker changes automatically.
•
Press the MENU or RETURN button to exit the menu screen.
Using Aspect Ratio Function
* Use Picture mode function to set the projector for the best picture appearance.
1. Press the Q.MENU button on the remote control.
2. Press the ∧, ∨ buttons to move to Aspect Ratio.
3. Press the <, > buttons to select a desired screen size.
◄
4:3
►
◄
Cinema Zoom1
►
• Some options may not be available depending on input signals.
• You can use this function through the MENU button.
• To exit the menu display, press the RETURN button.
Using Keystone Function
* Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape.
* Only use the Keystone function when you can't get the best angle of projection.
1. Press the KEYSTONE +, - button of remote control.
2. Press the KEYSTONE +, - button to adjust the screen condition
as you want.
• Keystone can be adjusted from -40 to 40.
• You can use this function through the MENU button.
•
To exit the menu display, press the RETURN button.
20
◄
Just Scan
►
◄
Zoom
►
SCREEN
PJT Mode
Aspect Ratio
Keystone
RGB Config.
◄
Set By Program
►
◄
16:9
►
•Keystone
ꔂMove ꔉOK
: Front
: 16 : 9
-
Q-Menu
Aspect Ratio
◄
16:9
Picture Mode
Vivid
Sleep Timer
Off
Eject USB
Eject
Close
0
-
◄
+
►
+
►
ꔉOK