Basic Operation Of The Projector - LG HS201 - LED Projector Slim Line Design Just 1.8 Lbs Owner's Manual

Installing and Composition

Basic Operation of the Projector

1. Place the projector on a sturdy and horizontal surface with the PC or AV source.
2. Place the projector with the desired distance from the screen. The distance between the projector and the screen
determines the actual size of the image.
3. Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right
angle, the screen image will be crooked. Although, slight angles can be counteracted using the Keystone adjuste-
ment. (Refer to page 20.)
4. Connect the power cable to the projector and the wall outlet after placing the projector in its desired location.
projection distance based on the picture format
Screen height (X)
Screen Width (Y)
Diagonal Size
(inch)
12
Screen
X/2
X/2
Projection distance (D)
Y/2
Screen
Y/2
Projection distance (D)
4 : 3 Scale
Horizontal Size
Diagonal Size
(mm)
(mm)
Projection offset ratio:100%
58.2mm
Vertical Size
Projection Distance(D)
(mm)
(mm)