Function
SCREEN Menu Options
To Change PJT Mode
* This function turns the projected image upside down or flips horizontal.
1 . Press the Q.MENU button on the remote control.
2 . Press the <, > buttons to move to PJT Mode.
3 . Press the ∧, ∨ button to select a desired item.
Select Rear when projecting from the back of the transparent screen purchased
•
separately.
•
Select Ceiling when installing the product on the ceiling.
•
When PJT Mode is Rear/Ceiling, the left/right of the speaker changes automatically.
•
You can use this function through the MENU button.
•
Press the BACK button to exit the menu screen.
Using Aspect Ratio Function
Press the RATIO button to select a desired screen size.
ꔗ
4:3
ꔗ
Cinema Zoom1
•
Some options may not be available depending on input signals.
You can use this function through the MENU button.
•
Press the BACK button to exit the menu screen.
•
Using Keystone Function
* Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape.
* Only use the Keystone function when you can't get the best angle of projection.
1 . Press the KEY.Sꔌ, KEY.Sꔍ button of remote control.
2 . Press the KEY.Sꔌ, KEY.Sꔍ button to adjust the screen condition as
you want.
•
Keystone can be adjusted from -40 to 40.
•
You can use this function through the MENU button.
•
Press the BACK button to exit the menu screen.
20
ꔃ
ꔗ
Just Scan
ꔃ
ꔗ
Zoom
ꔃ
ꔗ
Set By Program
ꔃ
ꔗ
16:9
•Keystone
PJT Mode
Front
Aspect Ratio
ꔃ
16:9
ꔃ
0
ꔗ
-
ꔃ
+
ꔉOK