Table of Contents
Advertisement
Operating the Projector
SCREEN Menu Options
To Change PJT Mode
* This function turns the projected image upside down or flips horizontal.
1 . Press the Q.MENU button on the remote control.
2 . Press the ＜, ＞ buttons to move PJT Mode.
3 . Press the ∧, ∨ button to select a desired item.
•
Select Rear when projecting from the back of the transparent screen purchased separately.
Select Ceiling when installing the product on the ceiling.
•
When PJT Mode is Rear/Front Ceiling, the left/right of the speaker changes automatically.
•
You can also use this function through the MENU button.
•
Press the BACK button to exit the menu screen.
•
Using Aspect Ratio Function
Press the RATIO button to select a desired screen size.
4:3
Cinema Zoom1
•
Some options may not be available depending on input signals.
You can also use this function through the MENU button.
•
•
Press the BACK button to exit the menu screen.
Using Keystone Function
* Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape.
* Only use the Keystone function when you can't get the best angle by moving the projector.
1 . Press the KEY.Sꔌ, KEY.Sꔍ button of remote control.
2 . Press the KEY.Sꔌ, KEY.Sꔍ button to adjust the screen condition as
you want.
•
Keystone can be adjusted from -40 to 40.
•
You can also use this function through the MENU button.
•
Press the BACK button to exit the menu screen.
22
Just Scan
Zoom
Set By Program
16:9
•Keystone
PJT Mode
CH
Front
Aspect Ratio
16:9
CH
ꔗ
ꔃ
0
-
+
ꔉOK
Advertisement
Table of Contents
