Remote Control; Installing Batteries - LG HS201 - LED Projector Slim Line Design Just 1.8 Lbs Owner's Manual

Remote Control

INPUT Button
VOLUME +, - Button
RETURN Button
◉OK, ∧/∨/＜/＞ Button
USB control Buttons
(Functions as the STILL button in
any mode other than DivX.)
PAGE

Installing Batteries

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED WITH AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
(A)
1. Remove the battery compartment
cover by sliding the cover in the
direction of the arrow (A). Pull out
the cover in the direction of the
arrow (B).
▪ Only use a 3V lithium battery (CR2032).
▪ Dispose of used batteries according to local ordinance regulations.
▪ Remove the battery when not using the projector for prolonged periods.
AUTO Button
USB Button
STILL Button
Button
ꔏ
(B)
2. Insert the battery with the positive side
facing up.
MUTE Button
POWER Button
KEYSTONE +, - Button
MENU Button
BLANK Button
Q.MENU Button
PAGE Button
ꔎ
MARK Button
3. Replace the cover.
Names of parts
9