Panic Mode; Silent Mode; Transmitter Standard Configuration - Directed Electronics 2000 MAX Owner's Manual

Panic Mode

If you are threatened near your recreationnal vehicle, you can attract atten-
tion by triggering the system with the remote transmitter. Just press
2.5 seconds, and you will enter Panic Mode. The siren will sound and the
brake light will flash (If installed) for the programmed siren duration. to stop
Panic Mode at any time, press

Silent Mode

To temporarily turn off the arm or disarm chirps, use the Slent Mode. Simply
press for less than one second before arming or disarming, and confirma-
tion chirp(s) will be eliminated for the one operation only. If you want the
arm/disarm chirps turned off permanently, your dealer can do this for you.
NOTE: The warn Away response to lighter impact is bypassed if the system is armed using Slient Mode. This
ensures that no chirps will beemitted by the siren in an area you want chirp-free. The system is still capable
of triggering, only the Warn Away response is bypassed.
Standard transmitter configuration
The security system is suplplied with 2- 4 button remote transmitter, when
using the auto configuration of the Transmitter Learn Routine, here's the stand-
ard configuration you will get of the 820041 remote transmitter, will be :
2002 Directed Electronics, (Canada). Inc.
on the remote transmitter again.
Arms the security system
Disarm the security system
Silent Mode activation
Panic Mode activation, press for 1.5 seconds
AND Channel 3 for auxiliary function 508 D activa
tion
for
5