Quick Reference Guide - Directed Electronics Auto Mate AMX 8.5 Owner's Manual

To lock/arm using your 2-way remote
■ To arm the system press
nected). The in-vehicle status LED will begin to flash. The Failsafe
Starter Kill will prevent the vehicle's starter from cranking if it has been
installed. The vehicle's horn (if connected) will honk and the parking
lights will flash once to confirm arming of the system.
To unlock/disarm using your 2-way remote
■ To disarm the system press
connected). The Failsafe
horn (if connected) will honk twice and the parking lights will flash twice.
Disabling the Failsafe
■ Turn on the ignition. Press and release the Valet
seconds. The in-vehicle status LED will stop flashing and the vehicle
should start. Be sure to check with the installer for the location of the
®
Valet switch.
To remote start the vehicle
■ Press
vehicle will start and run for the programmed amount of time.
To enter or exit Valet
■ Turn the ignition to the "ON" position. Turn the ignition back off. Press
and release the Valet
status LED will light steadily if you have entered Valet
®
let Mode, repeat the steps above. The in-vehicle status LED will turn off
when exiting Valet
To activate Panic Mode
■ Press and hold
To disable the remote start system
■ To disable the remote start, move the shutdown toggle switch to the OFF
position.
Location of Shutdown Switch______________________________
© 2004 directed electronics, inc.

QUICK REFERENCE GUIDE

for one second. The doors will lock (if con-
®
Starter Kill will be deactivated and the vehicle's
®
Starter Kill without a 2-way remote
twice. The parking lights will turn on (if connected) and the
®
Mode
®
switch once within 10 seconds. The in-vehicle
®
Mode.
for 1.5 seconds.
for one second. The doors will unlock (if
®
switch once within 10
®
®
Mode. To exit Va-
33