Visioneer STROBE 500 - FOR WINDOWS User Manual page 14

5. Detach the scanner body from the docking station and remove the
foam strip from the docking station.
1. Press and hold the release button on the side of the docking
station.
2. Tilt the scanner body towards the front and lift the scanner out of
the Docking Station.
3. Remove the tape and foam strip from the docking station.
4. Place the scanner body back on the docking station.
Detailed instructions for detaching and attaching the scanner are on
page 27.
6. Unfold the Input Tray and Extension from the paper guide.
S 1: U A
TEP NPACK AND SSEMBLE THE
S 7
CANNER