Visioneer STROBE 500 - FOR WINDOWS User Manual page 108

3. The roller is held in place with a lock tab that rotates to lock and
unlock it. To unlock the tab, rotate it upward until the small lock
flange is completely free.
4. When the roller is unlocked, it can be removed from its mounting
sockets.
5. Discard the worn roller. It cannot be repaired.
6. Before installing the new roller, clean any dust that may have gotten on
it during shipping.
7. Insert the right end of the roller into its housing socket in the scanner.
8. Align the lock tab, on the orange lock flange, with the slot in the
scanner.
9. Rotate the lock tab into the slot on the scanner.
R R A
EPLACING THE OLLER SSEMBLY
101