Visioneer PATRIOT 780 SCANNER User Manual page 98

4. Wipe the ADF pad from top to bottom. Be careful not to snag the cloth
on the springs on either side of the pad.
5. Close the cover when you're finished.
C F G
LEANING THE LATBED
To ensure the best quality scanned item, wipe the entire flatbed scanner glass
with a soft, dry, clean cloth to rid the glass of dust or other debris.
If any residue remains after wiping the glass with a dry cloth, try dampening
the cloth with 95% Isopropyl rubbing alcohol and wipe off the residue.
Note: When cleaning the glass, make sure to clean the thin strip of glass next
to the flatbed glass. This thin strip of glass is the area where the ADF passes
the paper across the glass. If lines appear on the images scanned from the
ADF, but not from the Flatbed, the glass may be dirty.
Clean the raised, thin plate of
glass here when cleaning the
flatbed glass.
LASS
C S
LEANING THE CANNER
91