Configure Before Scan - Visioneer PATRIOT 780 SCANNER User Manual

C B S
ONFIGURE EFORE
Choosing Configure Before Scan simply opens either the TWAIN or WIA
scanning interface when you click a button. You then use that interface to
change the color mode, resolution, and other settings. When you scan, the
scanned image will still be sent as the File Format and to the same Destination
Application already selected in the OneTouch Properties window for that
button.
T C B
O SET ONFIGURE EFORE
1. Open the OneTouch Properties window.
2. Using the button selection arrows, choose the button that you want to set
to configure before scanning.
3. Select the scan configuration Configure Before Scan.
Click the arrows to select a
button.
Select Configure Before Scan.
Right-click on Configure Be-
fore Scan to get the menu, and
choose the interface to use for
configuring.
4. Right-click on Configure Before Scan and choose an interface to use for
configuring before scanning.
TWAIN—The TWAIN Interface opens for you to set the scanning mode.
See "Scanning from TWAIN" on page 72 for detailed instructions about
scanning with the TWAIN Interface.
WIA—The Windows Image Acquisition Interface (WIA) opens for you
to configure the scanning. See "Scanning from Windows Image
Acquisition (WIA)" on page 86 for detailed instructions about scanning
with the WIA Interface.
5. Click OK or Apply on the OneTouch Properties window.
U S F
NIQUE CANNING EATURES AND
CAN
S
CAN
D 59
ESTINATIONS