Visioneer PATRIOT 780 SCANNER User Manual page 78

C
HECKING THE
3. Click the Properties button.
Your scanner has a built-in power saving feature that is set to power down
after 15 minutes of idle time. You can change the time before the scanner
powers down, from 1 minute to a maximum of 3 hours.
4. Click the arrows for the Lamp time-out setting and choose a time setting.
To turn the lamp on and off manually without turning off power to the
scanner, click the Lamp On or Lamp Off buttons.
To return the scanner to its factory settings, click Reset Device.
5. Click OK to save the changes and close the dialog box.
Note: The lamp cannot be turned off if the scanner top is up. Close the
scanner lid before turning off the lamp.
H S
ARDWARE AND ETTING THE
L P S
AMP OWER AVING
71