Chapter 7: Scanning From Isis - Visioneer PATRIOT 780 SCANNER User Manual

Scanning from ISIS
You can use the ISIS interface from QuickScan™ or any other application that
will access the ISIS driver. The QuickScan Demo software was provided with
your scanner.
Note that the ISIS interface for each application varies depending on the
application. Please refer to that software application's User Guide for
instructions on scanning with the ISIS interface. The QuickScan User's Guide
is available on the installation disc that you received with the scanner.
A ISIS I
CCESSING THE NTERFACE FROM
Open the QuickScan software to access the ISIS driver scanning options.
Please note that you may see the following warning message:
1. Please disregard the message and click Continue.
The ISIS drivers were installed correctly when you selected an ISIS install
option during the installation of your scanner. Please see page 13 for ISIS
driver installation options.
2. The Scanner Selection dialog box will then appear.
Select Visioneer Patriot 780 from the list of scanners and click OK.
3. QuickScan is now ready to scan using your scanner.
F T
INE UNING
Q S
UICK CAN
Y S 89
OUR CANS