Adding A Device Extension - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - MANAGING SENSOR DEVICES REV 1 Manual

Adding a Device
Extension
Step 1
Step 2
Step 3
The Device Extensions window provides the following details for each device
extension:
Table 2-1 Device Extension Parameters
Parameter
Extension Name
Description
Enabled
Default for Device Types Specifies the device type(s) for which the device extension
To add a device extension:
In the Administration Console, click the SIM Configuration tab.
The SIM Configuration panel appears.
Click the Sensor Device Extensions icon.
The Device Extensions window appears.
Click Add.
The Add a Device Extension window appears.
Managing Sensor Devices Guide
Description
Specifies the name of the device extension.
Specifies a description for this device extension.
Specifies whether or not the device extension is enabled.
is the default.

Adding a Device Extension

25