Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - MANAGING SENSOR DEVICES REV 1 Manual page 20
Managing sensor devices
Hide thumbs
Also See for SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - MANAGING SENSOR DEVICES REV 1:
- Administration manual (92 pages) ,
- Manual (130 pages) ,
- Manual (246 pages)
Table of Contents
Advertisement
16
M
S
ANAGING
ENSOR
Step 11
Step 12
D
EVICES
The Protocol Configurations window appears.
If you have selected SNMPv2:
Click Configure.
a
The SNMPv2 Configuration Parameters window appears.
In the Community field, specify the SNMP community, such as public. This
b
parameter only applies if you are using SNMPv2c. The default is Public.
Click Save.
c
The Protocol Configurations window appears.
If you have selected SNMPv3:
Click Configure.
a
The SNMP Configuration Parameters window appears.
Enter values for the parameters:
b
- Authentication Protocol - Using the drop-down list box, select the
algorithm you wish to use to authenticate SNMP traps. This parameter is
required if you are using SNMPv3. The default is MD5.
- Authentication Password - Specify the password you wish to use to
authenticate SNMP. This parameter is required if you are using SNMPv3.
- Decryption Protocol - Using the drop-down list box, select the protocol you
wish to use to decrypt SNMP traps. This parameter is required if you are
using SNMPv3. The default is AES256.
- Decryption Password - Specify the password used to decrypt SNMP traps.
This parameter is required if you are using SNMPv3.
- User - Specify the user access for this protocol. The default is AdminUser.
Managing Sensor Devices Guide
Advertisement
Table of Contents
Related Manuals for Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - MANAGING SENSOR DEVICES REV 1
Related Products for Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - MANAGING SENSOR DEVICES REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1
- Juniper STRM LOG MANAGEMENT 2008.2 - S 6-2008
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper MEDIA FLOW CONTROLLER 2.0.5
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper 200 Series