12
M
S
ANAGING
ENSOR
Step 7
Step 8
D
EVICES
Click Save.
c
The Protocol Configurations window appears.
If you have selected JDBC:SiteProtector:
Click Configure.
a
The configuration window appears.
Enter values for the parameters:
b
- IP - Specify the IP address for the ISS SiteProtector device.
- Port - Specify the port used by the server database to listen for remote
connections. The default port is 1433.
- Username - Specify the user name. This username must match the value
entered when defining the database user when configuring ISS
SiteProtector. For more information, see the Configuring DSM Guide.
- Password - Specify the user password. This password must match the
value entered when defining the database user when configuring the IBM
Proventia Management SiteProtector. For more information, see the
Configuring DSM Guide.
- Database Name - Specify the database name for the ISS SiteProtector.
Default name is RealSecure DB.
- Table Name - Specify the table name used to store the events. Default
name is SensorData1.
Click Save.
c
The Protocol Configurations window appears.
If you selected JuniperNSM:
Click Configure.
a
The Juniper NSM Configuration Parameters window appears.
Managing Sensor Devices Guide