Adding A Radius Server; Changing The Priority Of Radius Servers; Deleting A Radius Server; Editing Radius Server Parameters - Juniper NSM3000 - REV 1 Manual

NSMXpress and NSM3000 User Guide
48
The following sections explain how to manage a RADIUS server.
Adding a RADIUS Server on page 48
Changing the Priority of RADIUS Servers on page 49
Deleting a RADIUS Server on page 49
Editing RADIUS Server Parameters on page 49

Adding a RADIUS Server

To add a RADIUS server:
Select System Administration
1.
appears listing the RADIUS Servers that have been added. See Figure 31 on page 48.

Figure 31: RADIUS Servers Dialog Box

Click to add a RADIUS Server to the WebUI. The Add RADIUS Server dialog box
2. Add
appears. See Figure 32 on page 48.

Figure 32: Add RADIUS Server Dialog Box

Configure the following parameters in the Add RADIUS Server dialog box:
3.
a. : The name of the user to be authenticated by the RADIUS server
Name
b. Server address : The IP address or the hostname of the RADIUS Server.
c. : The shared secret the NSM appliance and the RADIUS server use
Shared secret
for secure authentication.
d. Auth Port : The RADIUS authentication software port. (We recommend UDP port
1812)
> RADIUS Management . The RADIUS Servers dialog box
Copyright © 2010, Juniper Networks, Inc.