If you connected both a cable and an indoor/outdoor antenna:
Repeat steps 2-4 on page 18, but select the other antenna in step 4. For exam-
ple, if the HDTV has already memorized the cable TV channels, select
indoor/outdoor antenna in step 4.
You can now press ANTENNA on the remote control to switch back and forth
between cable TV and indoor/outdoor antenna channels.
Adding and Deleting Channels
To add channels that were not memorized or delete unwanted channels:
1
Highlight the Setup icon and press ENTER.
2
Highlight Setup Channels and press ENTER.
3
Highlight Add/Delete Channels and press ENTER.
•
If the channel is memory,
The channel is in memory.
Press ENTER to delete. Press EXIT when done.
Press CH UP/DN or use NUMBER buttons for other channels.
Press MENU to return to SETUP menu.
•
If the channel is not in memory,
The channel is not in memory.
Press ENTER to add. Press EXIT when done.
Press CH UP/DN or use NUMBER buttons for other channels.
Press MENU to return to SETUP menu.
4
Use CH
yz
or the number buttons to tune to the channel you would like
to add or delete. Press ENTER to add or delete the channel.
5
If you would like to add or delete additional channels, repeat steps 1-4.
Press EXIT to exit the menus.
If you connected both a cable TV and an indoor/outdoor antenna:
1
Press ANTENNA. This will switch the HDTV to the signal from the
other antenna.
2
Repeat adding/deleting channels as described above for the other antenna.
you will see the following message:
you will see the following message:
19
HDTVInstruction Manual