To Exit The Learn Routine; Feature Menus; Menu #1 - Automate 552 Installation Manual

to exit the learn routine

The learn routine will be exited if:
The ignition is turned on.
The Valet/Program switch is pressed too many times.
More than 15 seconds elapses between programming steps.
One long horn honk (if connected) indicates that the Learn Routine has been exited.

feature menus

menu #1

FEATURE DEFAULT - LED ON SETTING
NUMBER (PRESS CHANNEL 1)
1-1 Active arming
1-2 Chirps on
1-3 Ignition controlled door locks on
1-4 Active locking
1-5 0.8 second door lock pulses
1-6 Double pulse unlock off
1-7 Channel 2 output - Delayed (1)*
1-8 Factory alarm disarm with Channel 2 on
1-9 Code Hopping™ on
*NOTE: The numbers in parentheses indicate the number of times the LED will flash.
34
t
LED OFF SETTING
(PRESS CHANNEL 2)
Passive arming
Chirps off
Ignition controlled door locks off
Passive locking
3.5 second door lock pulses
Double pulse unlock on
Channel 2 output - Instant validity (2)/
latched (3)/latched reset with ignition
(4)/30-second timed (5)/second unlock (6)*
Factory alarm disarm with Channel 2 off
Code Hopping™ off
© 1999 Directed Electronics, Inc. Vista, CA