Removing A Memory Module; Verifying The Expanded Memory - Kyocera FS-1350DN Advanced Operation Manual

3-4
3
Remove the fixing tape in case of the first installation. Then, remove
the memory slot cover as shown in the figure.
4
Remove the memory module from its package.
5
Aligning the cutouts of the memory module with the matching keys of
the socket, carefully plug the memory module into the memory
socket until it clicks in place. Then, push down the memory module
to secure.
CAUTION Before inserting a memory module in the printer,
make sure that the printer is switched off.
6
Push down the memory module to secure.
7
Reinstall the memory slot cover and the right cover.

Removing a Memory Module

To remove a memory module, remove the right cover and the memory
slot cover from the printer. Then, carefully push out the two socket
clamps. Ease the memory module out of the socket to remove.

Verifying the expanded memory

To verify that the memory module is working properly, test it by printing a
status page.
Option