Kyocera FS-1350DN Advanced Operation Manual page 51

>>Courier
?Regular
>Font Select
Internal
>>Size
012.00 point(s)
>>Size
012.00 point(s)
>Font Select
Internal
>>Pitch
>>Pitch
Using the Operation Panel
5
Press [OK]. A blinking question mark (?) appears.
6
Select Regular or Dark using
7
Press [OK].
8
Press [MENU]. The display returns to Ready.
Changing the Default Font Size
You can change the size of the default font. If you selected a proportional
font, the character size can also be changed.
1
Press
2
Press
>
3
Make sure that Internal is displayed and press
4
Press
5
Press [OK]. A blinking question mark (?) appears.
6
Press
cursor. The font size can be set between 4 and 999.75 points, in
0.25-point increments. Use
7
When the desired size is displayed, press [OK].
8
Press [MENU]. The display returns to Ready.
Character Pitch
You can set the character pitch for fixed fonts.
1
Press
2
Press
>
3
Make sure that Internal is displayed and press
4
Press
10.00 cpi
5
Press [OK]. A blinking question mark (?) appears.
10.00 cpi
6
Press
cursor. The character pitch can be set 0.44 and 99.99 characters per
inch, in 0.01 character-per-inch increments. Use
cursor right and left.
while Print Settings > is displayed.
or repeatedly until >Font Select > appears.
or repeatedly until >>Size appears.
or to increase or decrease the value at the blinking
or
while Print Settings > is displayed.
or repeatedly until >Font Select > appears.
or repeatedly until >>Pitch appears.
or to increase or decrease the value at the blinking
or .
.
to move the cursor right and left.
.
or to move the
2-33