Tcp/Ip - Konica Minolta bizhub C35P Reference Manual

TCP/IP

TCP/IP (shown above)
The Network - TCP/IP - TCP/IP window allows you to configure the following
items. For more information on these TCP/IP, see Chapter 6 "Network Print-
ing"
Item
TCP/IP
Speed
LPD
SLP
LLMNR
Apply button
Clear button
Configuring the Printer
Description
Sets whether or not to use TCP/IP.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - ENABLE
Specifies the operating mode and speed for Ethernet.
Choices: Auto, 10Base-T(Half), 10Base-T(Full),
100Base-TX(Half), 100Base-TX(Full),
1000Base-T(Full)
Default: Auto
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET -
SPEED/DUPLEX
Select whether or not LPD is used.
Choices: Enable, Disable
Default: Enable
Select whether or not SLP is used.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - SLP - ENABLE
Select whether or not LLMNR is used.
Choices: Enable, Disable
Default: Enable
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
7-117