Fax Automatic Reception - Kyocera FS-1128MFP Fax Manual

FAX Automatic Reception

When using this machine as a FAX-dedicated machine that does not receive telephone calls, set the machine
to FAX-dedicated reception. No special operation is required when receiving faxes.
NOTE:
When you are receiving DRD service from a telephone company, change the reception method to
[Auto (DRD)]. For details, refer to DRD Reception on page 6-13.
Reception Method
This machine allows the following five reception methods.
• Auto (Normal)
• Auto (FAX/TEL) (Refer to page 6-2.)
• Auto (TAD) (Refer to page 6-4.)
• Auto (DRD) (Refer to page 6-13.)
• Manual (Refer to page 4-12.)
Checking and Changing the Reception Method
OPERATION GUIDE
1
Press the System Menu/Counter key.
2
Press the or key to select [FAX].
3
Press the OK key.
4
Press the or key to select [Reception].
5
Press the OK key.
6
Press the or key to select [RX Settings].
7
Press the OK key.
8
Press the or key to select [Auto(Normal)].
9
Press the OK key.
FAX Operation (Basic)
3-9
3