Kyocera FS-1128MFP Fax Manual page 35

Memory Transmission (When originals are placed in the document processor)
After originals placed in the document processor are scanned and stored in the memory, the receiving system
is dialed. This method is very convenient because you can have originals returned to you without waiting for
sending of the originals to be completed. It is suitable for sending multiple-page sheet originals.
Memory Transmission (When originals are placed on the glass surface)
This method is suitable for sending book originals that cannot be placed in the document processor. After
originals placed on the glass surface are scanned and stored in the memory, the receiving system is dialed.
NOTE:
When continuous scan is set, you can continue with scanning of a next original after an original on the
glass surface has been stored in memory. Every time one page is scanned, you perform an operation to allow
continued scanning, and after all the originals have been stored in memory, the receiving system is dialed.
Direct Transmission (When originals are placed in the document processor)
After the telephone line has connected with the receiving system, scanning of the originals placed in the
document processor starts. When multiple-page originals are placed, each page is scanned after the previous
one is sent.
Direct Transmission (When originals are placed on the glass surface)
This method is suitable for sending book originals that cannot be placed in the document processor. After the telephone
line has connected with the receiving system, the originals placed on the glass surface are scanned and sent.
NOTE:
When continuous scan is set, you can continue with scanning of a next original after an original on the
glass surface has been sent. Every time one page is scanned, you perform an operation to allow continued
scanning.
Placing Originals
Dial the Receiving System
FAX No. Entry:
*
[ Chain
OPERATION GUIDE
3
4
B b
] [ Detail ]
Place the originals on the glass surface or in the
optional document processor. Refer to the
machine's Operation Guide for placing originals.
Enter the fax number of the receiving system using
the numeric keys.
NOTE:
When you press the numeric keys to enter
numbers, the screen changes to the entry screen
for the fax number.
FAX Operation (Basic)
3-3
3