Kyocera FS-1128MFP Fax Manual page 37

Sub Address
Encrypted TX
TX Start Speed
ECM
OPERATION GUIDE
Key
To communicate using the sub address, press
this key. For details, refer to Sub Address
Communication on page 4-25.
To send faxes using encryption, press this key.
For details, refer to Encryption on page 6-25.
To change the transmission start speed, press
this key. Select the speed from 33,600 bps,
14,400 bps, and 9,600 bps.
ECM (error correction mode) is a function to
automatically resend an image that has not been
correctly sent or received due to the effects of
noise on the telephone line during transmission.
To change the ECM communication setting, press
this key.
Description
On Hook
Press this key to connect to the telephone line.
When the FAX number has been entered, the machine
starts dialing to the receiving system.
After pressing this key, you can dial the number of the
receiving system using the numeric keys. For details,
refer to Manual Send on page 4-10.
Dialing methods without using the numeric keys
• Using the Address Book (Refer to page 3-15.)
• Using One-touch keys (Refer to page 3-25.)
• Manual Redial (recall) (Refer to page 3-27.)
NOTE:
In addition to a fax, you can include e-mail
transmission and folder (SMB/FTP) transmission to
send as one job. For details, refer to the machine's
Operation Guide.
FAX Operation (Basic)
3-5
3