Canon 3433B010 Basic Manual page 49

Error Message
The roll is empty.
Roll paper is not securely in
contact with roll holder.
Cause
The roll is empty.
There is remaining roll paper, but
because it could not be advanced,
it could not be detected.
When the roll was loaded, the roll
was not inserted firmly all the way
on the Roll Holder .
49
Corrective Action
Follow these steps to replace the used roll with a new
roll of the same type and size.
1. Press the Release Lever back and remove the roll.
(→ , Removing the Roll from the Printer)
(→"Removing the Roll Holder from Rolls," User
Manual)
2. Load the new roll.
(→ , Attaching the Roll Holder to Rolls)
(→ , Loading Rolls in the Printer)
3. If no barcode was printed on the roll, specify the
type of paper.
(→"Changing the Type of Paper," User Manual)
4. When you have selected ManageRemainRoll > On
in the Control Panel menu and a barcode is not
printed on the roll, also specify the paper length.
(→"Specifying the Paper Length," User Manual)
5. If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
Choose a higher level of Print Quality in the
Advanced Settings of the printer driver.
(→"Giving Priority to Particular Graphic Elements and
Colors for Printing," User Manual)
Follow these steps to reload the roll.
1. Press the OK button and remove the roll holder
from the printer.
2. Insert the roll firmly on the Roll Holder until it
touches the flange.
(→ , Attaching the Roll Holder to Rolls)
3. Load the Roll Holder in the printer.
Error Messages