Canon 3433B010 Basic Manual page 38

Error Messages
Error Message
Borderless printng not possible.
Prepare for parts replacement.
Parts replacement time has
passed.
No printhead
Printhead error
Wrong printhead.
Cause
The print job received specifies
a type or width of paper that is
not compatible with borderless
printing.
The loaded paper is a size not
compatible with borderless
printing.
It is almost time to replace
consumables for which service is
required.
It is past the recommended time
to replace consumables for which
service is required.
No Printhead is installed.
There is a problem with the
Printhead .
An incompatible Printhead has
been installed.
38
Corrective Action
Follow these steps to change the settings of the print
job to enable borderless printing.
1. Press ▲ or ▼ to select Stop Printing , and then
press the OK button.
2. Make sure the correct printer driver for the printer is
selected and try printing again.
For information on types of paper compatible with
borderless printing, refer to the Paper Reference
Guide .
(→"Types of Paper," User Manual)
Select None when you have set Detect Mismatch on
the control panel to Warning .
Press ▲ or ▼ to select Print With Border , and
then press the OK button to continue printing. The
document will be printed with a border.
Replace the paper with paper compatible for
borderless printing as follows.
1. Press ▲ or ▼ to select Change Paper , and then
press the OK button to remove the roll.
(→ , Removing the Roll from the Printer)
(→ , Removing the Roll Holder from Rolls)
2. Replace the paper with paper compatible for
borderless printing.
(→ , Attaching the Roll Holder to Rolls)
(→ , Loading Rolls in the Printer)
The printer now starts printing the print job.
For information on types of paper compatible with
borderless printing, refer to the Paper Reference
Guide .
(→"Types of Paper," User Manual)
Press ▲ or ▼ to select Stop Printing , and then press
the OK button.
Press ▲ or ▼ to select Print With Border , and
then press the OK button to continue printing. The
document will be printed with a border.
You can continue to use the printer for some time
until Parts replacement time has passed. will be
displayed.
Contact your Canon dealer for assistance.
Contact your Canon dealer for assistance.
Install the Printhead .
(→ , Replacing the Printhead)
Open the Top Cover and replace the Printhead with a
new one.
(→ , Replacing the Printhead)
Open the Top Cover and replace the Printhead with a
new one.
(→ , Replacing the Printhead)