Canon 3433B010 Basic Manual page 44

Error Messages
Error Message
Paper jam
Push the release lever back.
Paper jam
Manually rewind the roll all the
way and press OK.
Paper not aligned with right
guide.
Paper is crooked.
Cause
A paper jam occurred in the printer
during printing.
A paper jam occurred when
advancing the paper.
When paper was loaded, it was not
aligned with the guide on the right
side.
Paper loaded crooked was
detected when the paper was
advanced.
Corrective Action
1. Push the Release Lever back and remove the
jammed paper.
(→ , If Roll Paper Jams)
(→ , If a Sheet Jams)
2. Load the paper.
3. Pull the Release Lever forward.
4. If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
(→ , Loading Rolls in the Printer)
(→ , Loading Sheets in the Printer)
1. Rewind paper on the Roll Holder manually, all the
way, and then press the OK button.
2. Load the paper.
3. If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
(→ , Loading Rolls in the Printer)
Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4. Reload the sheet, aligning it with the guide on the
right.
Follow these steps to reload the roll.
1. Push the Release Lever back.
2. Adjust the right edge of the roll to make it parallel to
the orange Paper Alignment Line .
3. Pull the Release Lever forward.
(→ , Loading Rolls in the Printer)
If this error recurs after you reload the roll, remove
the Roll Holder from the printer, push the roll firmly in
until it touches the Roll Holder flange, and reload the
Roll Holder in the printer.
(→ , Attaching the Roll Holder to Rolls)
Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4. Reload the sheet, aligning it with the guide on the
right.
(→ , Loading Sheets in the Printer)
To disable this message (if it is displayed repeatedly
despite reloading paper, for example), choose Off or
Loose in the Skew Check Lv. setting of the printer
menu. However, this may cause jams and printing
problems because paper may be askew when printed.
Also, the Platen may become soiled, which may soil
the back of the next document when it is printed.
44