Canon 3433B010 Basic Manual page 36

Error Messages
Error Message
Cannot adjust paper feed.
End of paper feed.
Insufficient paper for job
This type of paper is not
compatible with HP-GL/2.
Cause
The Printhead nozzles are
clogged.
Highly transparent film is loaded
that cannot be used for automatic
feed amount adjustment.
You are pressing the ▲ button on
the Control Panel and trying to
rewind the roll to the edge.
The printer has received
a print job longer than the
amount of roll paper left when
ManageRemainRoll in the
Control Panel menu is On .
The printer has received an HP-
GL/2 print job that cannot be
printed on the paper that has been
advanced.
36
Corrective Action
Execute Adj. Quality again, as follows.
1. Press the OK button to clear the error.
2. Print a test pattern to check the nozzles.
(→"Checking for Nozzle Clogging," User Manual)
3. Clean the Printhead if the nozzles are clogged.
(→ , If Printing is Faint)
4. Execute Adj. Quality again.
(→ , If Banding Occurs)
Press the OK button to clear the error, and then adjust
the feed amount manually.
(→"Manual Banding Adjustment (Image Qual. Adj.),"
User Manual)
Release the ▲ button.
Press ▲ or ▼ to select Print , and then press the OK
button to resume printing.
However, the roll paper may run out during the
print job and you may not be able to print all of the
document.
Press ▲ or ▼ to select Change Paper , and then
press the OK button to stop printing.
Either change the printer driver Paper Source setting
or the GL2 Settings > Paper Source setting in the
printer menu, or replace the roll with a roll that has
enough paper for the print job, and then try printing
again.
(→ , Removing the Roll from the Printer)
(→ , Loading Rolls in the Printer)
Follow these steps to replace the type of paper in the
printer.
1. Press ▲ or ▼ to select Stop Printing , and then
press the OK button to stop printing.
2. Replace the paper with a type compatible with HP-
GL/2. For details on paper compatible with HP-
GL/2, refer to the Paper Reference Guide .
(→"Types of Paper," User Manual)
Press ▲ or ▼ to select Print , and then press the OK
button to resume printing. However, note that this
error may cause paper jams and affect the printing
quality.