Oki 62435901 User Manual page 153

ITEM OPTION
Print Setup System
(cont.) Configuration
Menu (cont.)
PCL Setup
Alarm Release
Auto Continue
Error Report
Font Source
Font No.
Font Pitch
Font Height
Symbol Set
A4 Print Width
White Page Skip
Appendix A - menu system > 153
DEFAULT VALUE/DESCRIPTION
Manual When Manual, non-
critical warnings, such
as requests for a
different paper size,
can be cleared by
pressing the RESET
button. When set to
Auto, they are cleared
when the print job
resumes.
OFF Determines whether
or not the MFP will
automatically recover
from a memory
overflow condition.
OFF If ON, the MFP will
print error details
when a PostScript
emulation error
occurs.
Resident Specifies the location
of the PCL default
font. Normally this will
be internal unless
additional fonts are
installed in the
expansion POM slot or
additional fonts have
been downloaded to
RAM as permanent
fonts.
I0 Sets the PCL font
number.
10.00 CPI Sets the width of the
PCL default font.
12.00 point(s) Sets the height of the
PCL default font.
PC-8 PCL symbol set. If the
font source and
number are changed
to one which does not
support the selected
symbol set, this must
be changed to an
available symbol set
for that font.
78 Column Sets the number of
columns subject to
Auto LF with A4 paper
in PCL. This is the
value when Auto CR/
LF Mode is set to OFF
with the 10CPI
character.
OFF Selects whether blank
pages are printed or
not.