General Safety Instructions - WAGNER W 660 Operating Instructions Manual

W 660
Congratulations on purchasing your WAGNER spray guns.
You have purchased a proprietary device that requires careful cleaning and care to en-
sure trouble-free functioning. Read the operating instructions carefully before
using the tool and observe the safety instructions. Keep the operating
instructions in a safe place.

General Safety Instructions

Caution!
Read all the instructions. Non-observance of the instructions below can
cause electric shock, fire and or serious personal injuries. The term
"power tool" used below covers both mains-operated power tools (with
mains lead) and accumulator-operated power tools (without mains
lead).
1. Workplace
a) Keep your workplace clean and tidy. Untidiness and unlit working areas can
lead to accidents.
b) Never use the tool in hazardous areas that contain flammable liquids,
gases or dusts. Power tools generate sparks that can ignite the dust or
vapors.
c) Keep children and other persons away when using the power tool. You
can lose control of the tool if you are distracted.
2. Electrical Safety
a) The tool plug must fit into the socket. The plug may not be modified in
any form. Do not use adaptor plugs together with protective-earthed
tools. Unmodified plugs and suitable sockets reduce the risk of an electric
shock.
b) Avoid physical contact with earthed surfaces such as pipes, heating
elements, stoves and refrigerators. The risk through electric shock increases
if your body is earthed.
c) Keep the equipment away from rain and moisture. The risk of an electric
shock increases if water penetrates electrical equipment.
d) Do not misuse the mains lead by carrying the tool by the lead, hanging it
from the lead or by pulling on the lead to remove the plug. Keep the lead
GB
11