Step 2: Clean Test Strip Holder
Wash the Test Strip Holder with
soap and water.
Clean the underside of the Test Strip
Holder and the small hole to make
sure that any dirt, blood, or lint is
removed. Rinse well.
Dry completely with a soft cloth or
tissue.
Step 3: Clean Test Area
CAUTION: DO NOT GET
WATER INSIDE THE METER.
The following cleaning agents will
damage the Meter.
DO NOT USE:
Alcohol
Cleansers with ammonia or
phenol
Windex
or other glass cleaners
®
Abrasive cleansers
Windex is a registered trademark of The Drackett Products
Company.
56