Storing and Recalling Numbers
Altering a Number in Memory
You can alter or delete a number in memory by
doing the following:
1. Recall the number as previously described.
2. When the number is shown in the display,
press î or ë to move the cursor to the
No:
line.
3. To add digits to the end of the number, just
enter the digits.
4. To replace digits, press C to erase the
digits you want to change and then enter the
new digits.
5. Press S to store the altered number. The
Memory 000 Now Occupied
message
Replace?
is shown in the display.
6. Press S to store the altered number. The
Same name in memory 000
message
Save anyway?
is shown in the display.
7. Press S to replace the number you
previously stored with the modified number.
Erasing a Number From Memory
1. Press î. The Main Menu is shown in the
display.
2. Press î or ë until the menu pointer is
Memory.
beside
3. Press S. The Memory menu is shown in
the display.
4. Press î or ë until the menu pointer is
RCL Mem.
beside
5. Press S.
6. Press î or ë until the number and name
you want to erase is shown in the display.
7. Press and hold C.
Location xxx
is shown in the display.
8. Press S to erase the number from
Memory is erased!
memory.
briefly in the display.
16
Erase memory?
is shown