Table of Contents
Advertisement
Using Your Phone
• If you plan to use voice functions in handheld mode, hold the
phone up to the ear in the position that would normally be used
on a call.
• Begin speaking after the tone ends.
• You can record labels that are up to 8 seconds in duration. Keep
in mind that longer tags provide a higher recognition rate.
• Shorter tags may cause a lower recognition rate. For example,
the name "Tom" can easily be confused with "Tim".
• Record your voice using the same tone and inflection as you
would when normally speaking. Try not to overpronounce or
speak too slowly when recording.
• When using Portable handsfree devices, you can easily activate
voice dialing by pressing the button near the microphone until
you hear a prompt.
Troubleshooting
If your phone cannot detect speech, one of the following might have
happened:
• You spoke too softly – try speaking more loudly.
• You held the phone too far away – hold it as you do during a call.
• The voice command was too short – it should be around one
second long.
• You spoke too late or too soon – speak immediately after the tone.
• You may want to re-record the voice command.
16
Using Voice control
Once you enable the options you want to use, you can use Voice
control. To use your voice, press and hold
name or command after the beep. You can also use the up or down
side volume keys or the answer button on your portable handsfree
accessory. From the Standby screen, you can say a name recorded in
your Contacts list. Once you have said a name, you will be prompted
to say the number type (for example, "Home") if there is more than
one number stored for that contact.
Working with Your Call List
Your Call list is a list of your last 50 incoming or outgoing calls.
You must turn your Call list on to see your last 50 incoming and
outgoing calls. You can view these numbers by simply pressing
from the Standby screen when no other digits are in the display. The
last number you called is shown in the display. Press
through your Call list.
Indicates an incoming call in your Call list.
Indicates a missed call in your Call list.
?
Indicates an outgoing call in your Call list.
Deleting a Number From Your Call list
You can delete a phone number from the Call list by pressing
when the number is highlighted. Press
of the number to your Call list.
, then speak your
YES
YES
or
to scroll
CLR
to confirm the deletion
YES
Advertisement
Table of Contents
