Table of Contents
Advertisement
Specifying a Memory Location
If you want to store a phone number in a
specific memory location, follow the previous
steps for entering the number and name, then
press î to move the cursor to the
Enter the memory location number.
Phone numbers stored in locations 1 through 9
can be used with the Super Dial feature. All
one- and two-digit memory locations can be
used with the Speed Dial feature.
Storing a Number in Secure Memory
A number stored in secure memory cannot be
recalled unless you enter the correct security
code. To store a number in secure memory,
follow the previously described steps for
entering a name and number, then press and
hold S. The phone prompts you to enter
your security code. If you enter the correct
code, the number is stored and
Stored Securely in Memory
in the display.
Recalling a Number Using ë
1. Press ë. The display should look similar to
this illustration.
2. To recall by name, press the key which
represents the first letters of the name.
OR
To recall by number press î to move the cursor
RECALL:
to the
line and enter the memory
location where the number is stored.
3. Press S.
Recalling Previously Dialed Numbers
For instructions on how
to recall previously
dialed numbers, see
Redialing the Last Number You Called on page
8.
Recalling a Number Using the
Memory Menu
1. Press î to access Menu mode.
2. Press î or ë until the menu pointer is
STORE
line.
beside
3. Press S to open the Memory menu.
4. Press î or ë until the menu pointer is
beside
5. Press S to open the
You can recall a number in memory by the
location number or by name.
6a. To recall by name, enter the letters of the
name in the
few letters of the name or the complete name.
If you enter just a few letters, the phone finds
the first name in memory that begins with the
letters you entered. See the table on page 14
for information on entering letters.
Number
OR
is shown
6b. If you want to search by the location
number, press î until the cursor is on the
RECALL:
number is shown in the display.
7. You can place a call to the number in the
display by pressing S.
Recalling a Number From Secure
Memory
1. Follow the previously described steps for
opening RCL Mem. in the Memory menu.
2. Press î until the cursor is on the
line.
3. Enter the location of the number stored in
secure memory.
4. Press ë.
the display.
5. Enter your security code.
6. If you enter the correct security code, the
number is shown in the display.
Storing and Recalling Numbers
Memory
.
RCL Mem
.
RCL Mem.
Name:
line. You can enter just a
line and enter the number. The
Security Code:
display.
RECALL:
is shown in
15
Advertisement
Table of Contents
